background image

Care and maintenance

56

ENGLISH

7

43

43

Fig. 18:  Turn the inlet, 1

41

42

43

43

40

Fig. 19:  Turn the inlet, 2

1.  Pull the milk hose off the appliance.

2.  Push the outlet 

(7) 

down as far as it will 

go.

3.  Press the locking mechanism 

(43)

 of 

the milk unit 

(40)

 together using two 

fingers and pull the milk unit down-

wards off the outlet.

4.  Pull the milk distributor 

(41) 

upwards 

out of the milk unit.

5.  Turn the inlet 

(42) 

by 180°.

Installation is carried out as described in 

reverse order. 

Information

To install, push the milk unit 

(41)

 onto the 

outlet 

(7)

 using both hands. Make sure 

that the locking mechanism 

(43) 

audibly 

engages on both sides. 

9  Care and maintenance

Regular cleaning and maintenance ensure 

the consistent high quality of your bever-

ages.

9.1  General cleaning

Clean the appliance regularly. Immediately 

remove external soiling caused by milk 

and coffee.

ATTENTION

The use of unsuitable cleaning agents 

can lead to scratched surfaces.

 

ƒ

Do not use any abrasive cloths, sponges 

or cleaning agents.

Requirement:

 The appliance is switched 

off.

 

ƒ

Clean the outside of the appliance with 

a soft, damp cloth and normal wash-

ing-up liquid. 

 

ƒ

Rinse the drip tray and the coffee 

grounds container with a soft, damp 

cloth and normal washing-up liquid.

 

ƒ

Clean the bean container with a soft, 

dry cloth.

9.2  Rinsing the coffee system

During rinsing, the nozzles at the outlet 

and the internal parts of the coffee system 

are rinsed. As a result, rinsing water from 

the interior enters the drip tray. 
If switch-off rinsing is not deactivated, the 

appliance rinses the coffee system when 

switching on and off. 
Rinsing can also be carried out manually.

Requirement:

 The ready symbol appears 

on the display.
1.  Place a vessel beneath the outlet. 

2.  Press the "menu/ok" button for 2 sec-

onds.

 

»

The menu appears on the display.

3.  Navigate to the 

Care

 > 

Rinsing

 menu.

4.  Use the arrow buttons to select 

Start

 

and confirm with "menu/ok".

 

»

The coffee system is rinsed.

 

»

The ready symbol appears on the 

display.

Summary of Contents for BARISTA T
































Reviews: