Installation and Basic Operation
Rev 1.4
Mellanox Technologies
16
Figure 7: Module with Locking Mechanism Closed
Figure 8: Module with Locking Mechanism Open
3.
Insert the module into the adapter card module cage.
4.
Close the locking Mechanism.
To remove the module from the cage:
1.
Unlock the locking mechanism by opening the handle.
2.
Pull the module out of the cage.
2.2.5 Status LEDs
Figure 9: Power and System LEDs
2.2.5.1
System Status Indicators
Status indicators are located on the right side of power side panel and on the left side of the con-
nector (IB/ETH) side panel. Both of these system status indicators are three color LEDs, display-
ing the same status on both sides of the gateway. The following status conditions are possible.
!
!
OK
OK
!
!
OK
STATUS
PSU 1
PSU 2
FAN
RST
System Status Indicators
PSU Status Indicators