Rev 1.4
Mellanox Technologies
25
13. Equipment Disposal
14. Local and National Electrical Codes
15. Hazardous Radiation Exposure
16. UL Approved AC Power Cords
17. Do Not Use The Switch As A Shelf Or Work Space.
18. WEEE Directive
Disposal of this equipment should be in accordance to all national laws and regula-
tions.
This equipment should be installed in compliance with local and national electrical
codes.
Caution – Use of controls or adjustment or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
CLASS 1 LASER PRODUCT and reference to the most recent laser standards:
IEC 60 825-1:1993 + A1:1997 + A2:2001 and EN 60825-1:1994+A1:1996+ A2:2001
For North American power connection, select a power supply cord that is UL Listed
and CSA Certified 3 - conductor, [18 AWG], terminated in a molded on plug cap rated
at 125 V, [15 A], with a minimum length of 1.5m [six feet] but no longer than 4.5m.
For European connection, select a power supply cord that is internationally
harmonized and marked “<HAR>", 3 - conductor, minimum 0,75 mm
2
wire, rated at
300 V, with a PVC insulated jacket. The cord must have a molded on plug cap rated
250 V, 10 A.
Caution: Slide/rail mounted equipment is not to be used as a shelf or a work space.
According to the WEEE Directive 2002/96/EC, all waste electrical and electronic
equipment (EEE) should be collected separately and not disposed of with regular
household waste.
Dispose of this product and all of its parts in a responsible and environmentally
friendly way.
