Rev 1.4
Mellanox Technologies
58
Appendix G: Advertencias de seguridad para la insta-
lación (Spanish)
1. Instrucciones de instalación
2. Instalación en un lugar con acceso restringido.
3. Sobrecalentamiento
4. Apilamiento del chasis
5. Conexión de fuente de alimentación redundante: peligro de descarga eléctrica
6. Cuando hay rayos: peligro de descarga eléctrica
7. Conexión y desconexión del cable Copper InfiniBand
Antes de conectar el equipo a la fuente de alimentación, leer todas las instruc-
ciones de instalación.
Esta unidad ha sido ideada para instalar en lugares de acceso restringido.
No se debe utilizar el equipo en un área con una temperatura ambiente superior
a la máxima recomendada: 45°C. Además, para garantizar una circulación de
aire adecuada, se debe dejar como mínimo un espacio de 8 cm (3 pulgadas) alre-
dedor de las aberturas de ventilación.
Los chasis no se deben apilar sobre otros equipos. La caída del chasis podría
causar lesiones corporales, así como daños al equipo.
Este producto incluye una fuente de alimentación redundante o, en su lugar, una
vacía. Si se dispone de una fuente de alimentación vacía, no utilizar el producto
si su tapa está quitada o no está bien cerrada.
No utilizar el equipo ni conectar o desconectar cables durante períodos de activ-
idad de rayos.
Dado que los cables de cobre InfiniBand son pesados y no son flexibles, su con-
exión a los conectores y su desconexión se deben efectuar con mucho cuidado.
Para ver advertencias o instrucciones especiales, consultar al fabricante del
cable.