Overview
Rev 1.0
Mellanox Technologies
12
1.2
Mellanox Part Numbering Legend
Table 4 describes the Mellanox Technologies adapter cards part numbering legend.
For example, the part number MHQA19-XTR describes Mellanox Technologies’ ConnectX
®
-2
LX VPI card with 1 QSFP port, a PCIe2.0 x8 5.0GT/s interface, no on-board memory (mem-free),
a tall PCI bracket, and RoHS R6 compliance. Using the legend,
• field M = M to indicate a Mellanox Technologies product,
• field H = H to indicate an InfiniBand Adapter Card,
• field T = Q to indicate QSFP QDR,
• field S = A to indicate the ConnectX
®
-2 LX family,
• field # = 1 to indicate one port,
• field I = 9 to indicate PCI Express 2.0 x8 running at 5.0GT/s,
• field G = blank to indicate first generation card
• field X = X to indicate no on-board memory,
• field B = T to indicate a tall bracket, and
• field R = R to indicate RoHS R6 (with no exemptions) compliance
Table 4 - Mellanox Cards Part Numbering Key
Adapter Card
OPN
MHTS#I-XBR
Field
Decoder
M
Mellanox
Technologies
H
Adapter Type
H = InfiniBand Host Channel Adapter, N = Ethernet Network Interface Card
T
Media
P = SFP+, T = UTP, Z = one SFP+ connector and one QSFP connector
S
Adapter
Architecture
T= InfiniHost®, A = InfiniHost® III Ex, S = InfiniHost
®
III Lx,
H = ConnectX
®
,
#
# ports
1 = 1, 2 = 2
I
Host Interface
X = PCI-X, 4 = PCIe x4, 8 = PCIe x8, 9 = PCIe (SerDes @ 5.0 GT/s),
G
Generation
<blank> = Initial product generation, B= generation B, C= generation C
-
Separator
X
Memory Size
X = MemFree, 1=128MB, 2=256MB, 3=512MB
B
Bracket
S = Short, T = Tall, N = None
R
RoHS
<blank> = non RoHS, C = RoHS R-5 w/ Exemption, R = RoHS R-6 Lead-Free
