ConnectX®-4 VPI Single and Dual QSFP28 Port Adapter Card User Manual for Dell PowerEdge
Rev 1.3
Mellanox Technologies
20
2. Expand System Devices and locate your Mellanox ConnectX-4 adapter card.
3. Right click the mouse on your adapter's row and select properties to display the adapter card
properties window.
4. Click the Details tab and select
Hardware Ids
(Windows 2012/R2) from the Properties pull-
down menu.
Figure 1: PCI Device
5. In the Value display box, check the fields VEN and DEV (fields are separated by ‘&’). In the
display example above, notice the sub-string “PCI\VEN_15B3&DEV_1003”: VEN is equal
to 0x15B3 – this is the Vendor ID of Mellanox Technologies; and DEV is equal to 1003 – this
is a valid Mellanox Technologies PCI Device ID.
3.9.2
On Linux
Get the device location on the PCI bus by running lspci and locating lines with the string “Mella-
nox Technologies”:
If the PCI device does not have a Mellanox adapter ID, return to Step 2 to check
another device.
The list of Mellanox Technologies PCI Device IDs can be found in the PCI ID reposi-
tory at
http://pci-ids.ucw.cz/read/PC/15b3
.
