Rev 1.8
50
Mellanox Technologies
9.3
Mellanox Innova IPsec EN LEDs
Figure 3: MNV101511A-BCIT/MNV101512A-BCIT LEDs Placement
1
(Example)
Group
A
LEDs: Network LEDs - these LEDs indicate the network link status. See
Section 9.3.1,
“Network LEDs Operation,” on page 51
for details.
LEDs: Debug LEDs - indicate memory calibration done, memory BIST done,
ConnectX-4 Lx link up is with traffic, Heartbeat and power good. See
Section 9.3.2, “FPGA
Debug LEDs,” on page 51
for details.
LEDs: FPGA load-flow Debug LEDs - see
Section 9.3.3, “FPGA Load-Flow Debug
LEDs,” on page 52.
1. The adapter card is shipped with the heat sink assembled.
The image shown is for informational purposes and does not necessarily represent the latest
revision of the card.
