Configuring the Appliance
Rev 1.0
35
Mellanox Technologies
You have entered the following information:
1. Hostname: <server name>
2. Use DHCP on eth0 interface: yes
3. Admin password (Enter to leave unchanged):
(unchanged)
4. bond0 IP address and masklen:
192.168.22.1/24
To change an answer, enter the step number to
return to.
Otherwise hit <enter> to save changes and exit.
Choice: <Enter>
Configuration changes saved.
The wizard displays a summary of your choices and
then asks you to confirm the choices or to re-edit them.
Either press <Enter> to save changes and exit, or enter
the configuration step number that you wish to return
to.
Table 11 - Configuration Wizard Session - IP Zeroconf Configuration
Wizard Session Display - IP Zeroconf Configuration (Example)
Mellanox configuration wizard
Do you want to use the wizard for initial configuration? y
Step 1: Hostname? [server name]
Step 2: Use DHCP on eth0 interface? [no]
Step 3: Use zeroconf on eth0 interface? [no] yes
Step 4: Default gateway? [192.168.10.1]
Step 5: Primary DNS server?
Step 6: Domain name?
Step 7: Admin password (Enter to leave unchanged)?
Step 8: bond0 IP address and masklen? [192.168.22.1/24]
You have entered the following information:
1. Hostname: ufm-appliance-898b4e
2. Use DHCP on eth0 interface: no
3. Use zeroconf on eth0 interface: yes
4. Default gateway: 192.168.10.1
5. Primary DNS server:
6. Domain name:
7. Admin password (Enter to leave unchanged): (unchanged)
8. bond0 IP address and masklen? [192.168.22.1/24]
To change an answer, enter the step number to return to.
Otherwise hit <enter> to save changes and exit.
Choice:
Configuration changes saved.
Table 10 -
Mellanox UFM-SDN Appliance Configuration
Wizard Session Display (Example)
Comments
