background image

Tips and safety warnings

  

-  Please read these instructions carefully before 

using the appliance and keep them for future 
reference. 

-  Unpack the appliance and check it is in perfect 

condition and working order. 

-  This device has been designed for household 

use, not for commercial use. 

-  Do not leave the appliance without supervision 

if you are not going to use it immediately. This 
will save energy and prolong the working life of 
the appliance. 

-  Keep the appliance out of the reach of 

children.

-  The appliance must not be connected to the 

mains while the boiler is being filled (Fig. 1). 

-  Before connecting the appliance to the mains, 

ensure the supply voltage is the same as that 
marked on the appliance. 

-  The water filling inlet must not be open during 

operation. 

-  This appliance must be connected to an 

electrical socket with an earth connection. 

-  Any improper use or failure to comply with the 

instructions for use will invalidate the warranty 
and free the manufacturer from any liability 
concerning the appliance. 

-  IF THE IRON IS IN ITS HOUSING AT 

MAXIMUM TEMPERATURE FOR A LONG 
TIME, THIS MAY CAUSE ALTERATIONS TO ITS 
COLOUR, BUT THIS HAS NO EFFECT ON THE 
PROPER OPERATION OF THE APPLIANCE. 

-   The appliance must be used and placed on a 

flat, stable surface 

-   When placing the appliance on its support, 

make sure the surface on which the support is 
fitted is stable. 

-   Do not use the appliance if it has been 

dropped, if there are visible signs of damage or 
if it leaks. 

Before using the appliance for the 

first time

 

This professional iron works with tap water. 
However, the use of distilled water is 
recommended in areas with a high lime level 
in the water. Some parts of the iron have been 
slightly greased. They can therefore give off steam 
on first use, but this steam will disappear after a 
short time. 
 

Practical tips

 

-  Keep the sole plate smooth, do not apply it 

to metallic objects (i.e., to the ironing-board, 
buttons, zips...). 

-  Fit the iron in its housing (L) for transport and 

storage, in order to improve its stability. 

-  To avoid burns, do not lean Bravissimo 2 Pro’s 

iron on its back

Description 

A  Iron on/off switch.
B  Boiler on/off switch.
C  Boiler operation LED.
D  Iron operation LED.
E  Steam pressure indicator LED.
F   Water filling cap.
G Mains 

connexion.

H  Iron steam switch.
J   Iron thermostat control. 
K  Iron thermostat LED. 
L   Iron housing. 

MW_EX23805 SteamStation_IM.indd   3

MW_EX23805 SteamStation_IM.indd   3

7/25/2007   2:02:50 PM

7/25/2007   2:02:50 PM

Reviews: