Cleaning
Care has been taken to assure
the user attempt service on the
center. However, from time-to-time
the outer surfaces may appear dull
internal components instead seek
service from an authorized service
that your bike has been properly
–
–
adjusted and lubricated at the
factory. It is not recommended that
For health reasons, it is necessary
anti-rust to the flywheel every time
contact surface of the flywheel with
brake to avoid rattling noises.
you clean the machine or at least
once a month. Apply oil in the
to clean the handlebars and seat
–
spray, as well as removing any sweat
from the bicycle’s frame. Apply
HANDLEBAR:
HOW TO ADJUST THE
Position the handlebar (G) at a
comfortable distance for exercising
–
but not going beyond the STOP
mark. Then, tighten the knob firmly.
HORIZONTALLY:
EN
HOW TO ADJUST THE SEAT
Slightly loosen the seat regulator
knob (B) by turning it
–
counterclockwise. Move the saddle
to a comfortable position for
exercising, and then firmly tighten
the knob by turning it clockwise.
or dirty, following the instructions
Cleaning metal surfaces may be
accomplished by using a soft cotton
listed below will restore and preserve
the original finish.
or terry cloth rag with a light
wax upon the console surface.
application of car wax. Do not
use aerosol sprays or pump
bottles as they may deposit
The safety level of the equipment can
that regular maintenance is performed.
owner or facility operator to ensure
when the exercise bicycle is regularly
examined for damage and repair. It is
the sole responsibility of the user/
The safety and integrity designed into
the machine can only be maintained
–
If they are deformed please contact
Please check if all warning labels are
in good condition and able to read.
–
the braking system for functionality.
cause injury.
The brake pad is most susceptible
to wear. Before exercising inspect
Care must be taken when lifting or
moving the equipment so as not to
only be maintained if it is regularly
–
–
–
examined for damage and/or
wear and tear.
From time-to-time, the console
purchase such a cleaning compound.
especially made for antistatic surfaces.
It is strongly recommended that you
This surface may be cleaned with
specially prepared chemicals found
in most computer supply stores
coating and cause a static build-up
that will damage the components.
surface may collect dust or
–
fingerprints. The use of harsh
chemicals will destroy the protective
the distributor to order a new sticker.
