EN
There are several holes in the
seat post allowing for a range of
heights.
Once the correct height has been
chosen, refit the adjustment knob.
Cleaning
For health reasons, it is necessary
to clean the handlebars and seat
after each class with a disinfectant
spray, as well as removing any
sweat from the bicycle’s frame.
Apply anti-rust to the flywheel
every time you clean the machine
or at least once a month. Apply
oil in the contact surface of the
flywheel with brake to avoid
rattling noises.
Care has been taken to assure
that your bike has been properly
adjusted and lubricated at the
factory. It is not recommended that
the user attempt service on the
internal components instead seek
service from an authorized service
center. However, from time-to-time
the outer surfaces may appear dull
or dirty, following the instructions
listed below will restore and
preserve the original finish.
Cleaning metal surfaces may be
accomplished by using a soft
cotton or terry cloth rag with a light
application of car wax. Do not use
aerosol sprays or pump bottles as
they may deposit wax upon the
console surface.
From time-to-time, the console
surface may collect dust or
–
–
–
–
–
–
–
–
–
–
–
fingerprints. The use of harsh
chemicals will destroy the
protective coating and cause a
static build-up that will damage
the components. This surface may
be cleaned with specially prepared
chemicals found in most computer
supply stores especially made for
antistatic surfaces. It is strongly
recommended that you purchase
such a cleaning compound.
The safety level of the equipment
can only be maintained if it is
regularly examined for damage
and/or wear and tear.
Care must be taken when lifting or
moving the equipment so as not to
cause injury.
The safety and integrity designed
into the machine can only be
maintained when the exercise
bicycle is regularly examined for
damage and repair. It is the sole
responsibility of the user/owner
or facility operator to ensure that
regular maintenance is performed.
Worn or damaged components
shall be replaced immediately or
the exercise bicycle removed from
service until the repair is made.
Anomalies and repair
Take the appliance to an
authorised technical support
service if product is damaged
or other problems arise. Do not
attempt to disassemble or repair
the appliance yourself as this may
be dangerous.
