3.2.1.3. Put the blade support on the axis in the middle
of the bowl, and press it to the bottom. Then fix the
chopping blade to the blade support, as shown in
Diagram 4 & 5.
Warning: The blade is sharp. Please only hold the
plastic part while using.
3.2.1.4. Put the food (eg. Meet) into the bowl, as
shown in Diagram 6. Big pieces of food need to be cut
into small pieces. ( 2 cm x 2 cm x 2 cm).
3.2.1.5. Put the cover on the bowl, and turn it until
securely fastened, as shown in Diagram7.
3.2.1.6. Insert the plug into the electric socket, Turn the
knob to the required level, as shown in Diagram 8.
(The speed is increased by levels. PULSE is the highest
level . Turn the knob to the PULSE for any intermittent
operation. )
3.2.1.7. When the chopping is finished, Turn the knob
to the “0”. After the blade stops, pour out the food.
3.2.2. Whisking function
3.2.2.1. Mixing function has almost the same operating
steps as a chopping function. The only change the
chopping blade to shredding blade. It is used for
mixing and whisking of food, eg, egg.
3.2.3. Slicing and shredding function
3.2.3.1. Put the protection cover onto the body tightly;
3.2.3.2. Fix the slicing/shredding knife to the knife
support, as shown in Diagram 9. Slicing knife makes
the food into slices. Shredding knife make the food into
shreds.
3.2.3.3. Put the bowl on the power unit first, then turn
the bowl in clock-wise direction, until hearing the chat-
tering sound. Then put the knife support on the axis in
the middle of the bowl, as shown in Diagram 10.
3.2.3.4. Put the cover on the bowl, and turn it until
hearing the chattering sound. Then fix the plug to the
electric socket, turn the switch to choose the level.
Place the strips of food through the bowl cover, and
push the food down slowly, When the food strip is
short, push them down with the measuring cup, as
shown in Diagram 11&12.
3.2.3.5. When the operation is finished, Turn the knob
to the“0”. After the blade stops completely, pure out
the food.
3.2.4. Juicing Function
3.2.4.1. Put the bowl on the power unit first, then turn
the bowl in clock wise direction, until hearing the chat-
tering sound. Then fix the filtrating plate and juice drill
to the bowl, as shown in Diagram 13&14.
3.2.4.2. Fix the plug to the electric socket, turn the
switch to 1
3.2.4.3. Cut the citrus fruit in half, then press the cut
side slowly onto the juice drill, as shown in Diagram15.
3.2.4.4. Pure out the juice, and mix with seasoning as
you like.
26210_IM.indd 4
2019-10-07 01:48:12 PM
