DRY IRONING
• The iron can be used on the dry setting with
or without water in the water tank, it is best
to avoid having the water tank full while dry
ironing.
• Turn the variable steam control to the mini-
mum position.
• Select the setting on the temperature control
dial best suited for the fabric to be ironed.
CAUTION: If the iron has been used for a long
period of time, it is hot and there is no water in
it, do not refill it with water until the iron cools
down.
BURST OF STEAM
• The burst of steam feature provides additional
steam for removing stubborn wrinkles.
• Turn the temperature control to ”••” or “•••”
position.
• Turn the variable steam control to the maxi-
mum position
• Press the powerful steam button to release the
burst of steam.
NOTE: To prevent water leakage from the sole-
plate, do not keep the powerful steam button in
for more than 5 seconds.
After Ironing
• Set the temperature control dial to the mini-
mum position.
• Remove the plug from the wall socket.
CARE AND CLEANING
• Before cleaning the iron ensure it is unplugged
from the wall socket and that it has completely
cooled down.
• Do not use any abrasive cleaners.
SELF-CLEANING
• Fill half of the water reservoir.
• Set the temperature control to its maximum
position.
• Insert the plug into the wall socket.
• Allow the iron to heat up until the indicator
light goes out.
• Unplug the steam iron.
• Holding the iron horizontally over the sink,
change the steam control to the maximum
position.
• Boiling water and steam will be ejected from
the holes in soleplate with impurities washed
out.
• Move the iron over an old piece of cloth. This
ensures that the soleplate is dry before stor-
ing.
STORAGE
• Unplug the appliance from the wall socket,
empty the water tank and the iron to cool
down completely.
• To protect the soleplate, place the steam iron
in an upright position.
23140_IM.indd 3
2013/07/15 08:21:45 AM
