User manual for MELONDIZDER mod.1
3
1.
Introduction
The main purpose of this manual is to show the
construction and way of work of MELONDIZER
mod.1. In this manual you could see information
necessary for safe setup, work, maintenance. We
advise to read this text carefuly before setup and
work.
2. Signs used in user manual
ALERT: text with wthis sign and bold font is
used in sentences important for safety.
Ignoring these sentences might result in
accident dangrous for You or device.
Electrical hazard!
Text with this sign informs about electrical
hazard which might happen during described
actions. Ignoring this sign might result in
accident dangrous for You or device.
3. Safety
3.1 General statements
During everyday use of MELONDIZER You should look after
technical condition. While working with MELONDIZER. You should
adhere to general rules of work with energized equipment. Operator
of device cannot be under effect of drugs. Operator is also obliged to
take care of device and to not let intruders interupt work of device.
User manual for MELONDIZDER mod.1
4
3.2 Rules of safe work
ALERT: Before work you should read those
information:
−
You should put on glasses protecting you from UV!
−
Don't use device in places endangered of explosion.
−
You have to disconnect with electrical network. We
advice wet wipes for cleaning. You should not clean
with means in form of spray. After cleaning device
have to become dry before work.
−
Before work you should pay attention to technical
condition. In case of any abnormalities you should
stop your work and cut off power supply. After that
you should contact with us.
−
Do not use the device in wet areas or near to water
supply. User should do everything in order to avoid
humidity insuide of device.
−
User's hands cannot be wet or sweaty.
−
Both electrode and object of work can heat up
during work to over 100 C. Do not touch electrode
or object of work during work or right after.
−
The device work best when after every 10 min of
work it has 20 min of rest. It avoids risk of
overheat.
−
User cannot touch electric conductor (especialy:
