M-WRG/ZNH-F (-FC)
User manual
M-WRG/LCD-F (-FC)
- 15 -
Meltem Wärmerückgewinnung GmbH & Co.KG
Am Hartholz 4 D-82239 Alling info@meltem.com www.meltem.com
3.5.2 Temperature program Automated Heating (HA)
(Only available with M-WRG/ZNH-F (-FC) units)
The temperature program Automated Heating HA enables you to additionally warm up the incoming supply air. The
thermostat of the unit is set to about 21°C as the ideal room temperature. You may increase or decrease this
temperature by up to 3°C. The maximum ventilation r ate for this program is 4.
Start program:
Start program as demonstrated in chapter 3.5
HA
Automated Heating ON
HO
Automated Heating OFF
Change Settings:
(1) Press the button to be able to change the temperature
(2) Press the button to select your preferred temperature
(3) After 20 seconds the “thermostat” symbol will stop blinking and your settings will automatically be saved. The
program starts automatically and the screen switches back to the current operating program display
•
If you wish to turn the Automated Heating HA OFF manually, simply press the button until the symbol
changes to Ho
•
If you wish to turn the Automated Heating HA back ON, simply press the button once. The symbol should
change to HA.
or
