M-WRG/ZNH-F (-FC)
User manual
M-WRG/LCD-F (-FC)
- 19 -
Meltem Wärmerückgewinnung GmbH & Co.KG
Am Hartholz 4 D-82239 Alling info@meltem.com www.meltem.com
4.2.2 Remove old filters
•
Twist left the filter covers and detach
•
Remove old filters and discard
•
Clean the cap with a damp cloth
4.2.3 Insert new filters
•
Insert new filters
•
Insert the filter covers (making sure the marked
arrows on case and cover are aligned) and turn
right
•
The marking (arrow) on the cap has to align with
the marking on the M-WRG ventilation unit
•
Make sure the covers sit flat and tight on the
cover
•
Repeat this process for both supply and stale air
filter caps.
Note:
Allergy Filters or Activated Carbon Filters have to be
installed as supply air filters!
4.2.4 Close unit cover
Please ensure the correct positioning of both
filter caps before putting the cover back on!
•
Grab the cover with both hands
•
Place it onto the unit and insert the hooks into the
slots
•
Rotate the cover downwards
•
Carefully push the cover closed on the bottom
edge until the hooks on each side snap into place.
•
Turn the M-WRG ventilation unit back on with the
power switch
Stale air filter
Supply air filter
Stale air filter
Supply air filter
Hooks
