11
ASSEMBLY INSTRUCTIONS
9
10
9. Attach dome assembly to Burner
Assembly (C) by securing Wing Nuts
(II) to Reflector Spacers (BB).
C
BB
II
10. Connect Hose & Regulator Assembly
(K) to 20lb. LP-gas cylinder (sold
separately).
Line up threads on fitting with those on
regulator and rotate clockwise until
tighten. HAND TIGHTEN ONLY. DO
NOT USE ANY HAND TOOLS TO
MAKE THIS CONNECTION. Be careful
not to cross threads when screwing in
fitting.
To disconnect the LP-Gas cylinder, first
make sure the cylinder valve is “OFF”.
Then, turn the knob on the regulator
counterclockwise until it is loose.
Warning:
Before connecting, be sure that there is
no debris caught in the head of the LP
gas cylinder head of the regulator valve
or in the head of the burner and burner
ports.
Check for leaks after connecting the
gas cylinder every time according to the
“Checking for Leaks” section on page
12.
K
II
x 3
Wing Nut
