Installation Manual: MeMC silvantis 72 cell Pv modules
Certification
•
IEC61215 certified by TÜV SÜD to ensure long-term operation in a variety of climates
•
IEC61730 certified by TÜV SÜD to ensure electrical safety
•
Stringent outgoing quality acceptance criteria benchmarked to industry standards
•
UL1703 listed by CSA for Canada and US
Environmental
AB8 (-50°C to +40°C)
Fire Resistance Rating
Class C
MEMC Silvantis Modules are certified by:
© Copyright 2012 MEMC Electronic Material
9 of 13
6.0 dIsClaIMer of lIaBIlITy
The information in this manual is based on MEMC’s knowledge and experience and is believed to be accurate. However, all
information in this manual (without exception) including recommendations and specifications does not constitute a warranty,
expressed or implied. MEMC reserves the right to change the manual, the module, or specifications without prior notice.
The product warranty shall be VOID if handling and installation of the product does not conform to MEMC’s written installation
instructions, or if the product has been reworked, repaired or otherwise modified in a manner not previously authorized by MEMC in
writing, or if the product is installed in an environment for which it was not designed. MEMC shall not be liable for special, indirect,
consequential, contingent or incidental damages related to or arising from the installation or use of the product by purchaser under
any circumstances.
MEMC assumes no responsibility for any product application or use which is beyond MEMC’s direct control. MEMC does not
accept responsibility and expressly disclaims liability for loss, damage, or expense arising out of or in any way connected to such
installation, operation or maintenance of the product.
International Product Certifications:
IEC 61215, IEC61730, CE, UL 1730, UL1703 listed by CSA and Safety Class II certifications ensure that MEMC solar products
operate safely and comply with global electrical, performance, reliability, and fire safety codes.
