Memmert SLM 400, Operating Instructions Manual

set

0

I

power

fresh air

0
1
2
3
4
5
6

alarm set

°C

UM 200-800/SM 200-400, ULM/SLM 400-800 

5

2.2  Installation options (special equipment) 

The oven can be set up on the floor or on a table (bench), 
model 500 - 700 on a subframe. Ensure at least 150 mm 
clearance between back of oven and wall. The distance 
between ceiling and oven should not be less than 200 mm 
and the minimum wall spacing to the sides is 80 mm. 
Generally, a sufficient circulation of air around the oven is 
required. 
After the oven has been set up horizontally the door can be 
adjusted if required (

see chapter -

MAINTENANCE

). 

The model 800 is movable. The front castors are lockable by means of a fixation. In order 
to assure stability, the front castors  

must always be adjusted to the front side

 of the 

oven for locking. 

2.3  Wall mounting (special  equipment) 

Up to model 700 for all ovens metal mounting brackets are 
available. A mounting bracket is delivered with an 
incombustible plate. The dimensions of the fixing screws 
are to be choosen depending on the total weight (equipment 
and loading) of the charge and the quality of the wall. 

Pitches of holes for wall fixation (wall bracket) 

model A 

B 

C 

mm inch mm inch mm inch 

200 489 

19,25 

770 

30,32  

300 569 22,4 770 

30.32  

400 489 

19,25 

850 

33.47  

500 649 

25,55 

930 

36,61  

600 889 

35,00 

1090 

42,91 

540 

21,26 

700 1129 

44,45 

1250 

49,21 410 16,14 

model 600 

model 700

Do not place the steriliser on a readily inflammable support!