13
16-6. EQ (equalizer, play attribute) Setting
• At the EQ setting mode display, by using previous (◀◀) and/or next (▶▶) jog buttons to select EQ play
attribute setting.
• The available EQ modes are FL(FLAT), ro(ROCK), Ho(HOUSE), dA(DANCE), JA(JAZZ), bA(BALLAD),
rb(R&B) and CL(CLASSIC). The feature is to enjoy music as selecting by category and/or preference.
• At the selected display, push the jog buttons in the directions of volume (+, -) to store the EQ setting
and to move to next setting mode. Press the MODE button for more than 3 seconds to complete the
EQ setting feature and to move to the standby mode.
16-7. CLEAN (Erase a Folder File/All of the Files) Setting
• The feature is for erasing a folder fi le selected or all of the files.
• The CLEAN ALL is identical to the formatting of PC, and the setting values are initialized to default setting.
• If the CLEAN ALL is performed at the main body, the operation speed for such as recording start and stop
is improved.
• It is highly recommend to perform the CLEAN ALL at the main body of the product.
• When the CLEAN is performed, the power is off automatically after erasing the file(s).
• The EQ(equalizer, play attribute) feature is only applied to the MUSIC file play.
For the VOICE (recorded) file play, applied EQ is set to FLAT(EQ OFF).
At the CLEAN display, push the jog button in the direction of next (▶▶) to select ALL. If the MODE button
is pressed briefly at the selected display, “YES NO” is displayed for erase confirmation. Select “YES” and
press the MODE button briefly, then the “CLEAN” is display and all the data in the memory are erased.
1)CLEAN ALL
At the CLEAN display, push the job button in the direction of next (▶▶) to FOLD(MUSIC, A, B,PCM).
If the MODE button is pressed briefly at the selected FOLDer display, “YES NO” is displayed.
Select “YES” and press the MODE button briefly, then the “CLEAN” is display and all the data in the
selected folder are erased.
2) CLEAN All the Files in the Selected Folder
<Folder MUSIC>
<Folder A>
<Folder B>
• Push the jog buttons in the directions of volume (+, -) to cancel the CLEAN operation and to move to next mode.
Press the MODE button for more than 3 seconds, it exits to the standby mode and the CLEAN operation is cancelled.
• Make sure to store the important files to PC prior to formatting.
The erase files cannot be restored.
• For system protection, the CLEAN may be operational only when the battery life level is bigger than
level 2. If remained battery life is less than level 1, replace the battery before CLEAN.
<Folder PCM>
Caution
Caution
Summary of Contents for MR-210
Page 15: ...15 MEMO...