memorex.c om
MA3911MS
User Guide
Please read these instructions completely,
before operating this product.
Please recycle.
Facilities may not exist in your area.
Name Here
I’ll Wake You Up
Mini Alarm
You can listen to your music from your Bluetooth enabled mobile device wirelessly
through this unit. When your phone rings, simply take the call with a touch of a
button. End the call by touching the same button, and return to enjoying your music!
Pair the mobile device as follows:
1. Turn on the speaker by pressing and holding the Power button
4
until the Blue
indicator lights and the beeps sound.
2. Turn your mobile device on and place it within 3 feet of the speaker.
3. Press and hold the Power button
4
until the indicator blinks blue and orange, then
release. The speaker is now in Pairing mode.
4. Enable the phone’s Bluetooth; refer to your mobile device for specific instructions,
but it is usually located in the Settings menu or similar location. After enabling,
this
Memorex BlueTooth
device will appear as an option. Select it on your mobile
device; the units will then pair with each other, two beeps will sound and the
orange indicator will light.
PAIRING A BLUETOOTH MOBILE DEVICE
1. Turn your mobile device on and place it within 3 feet of the speaker.
2. Turn on the speaker by pressing and holding the Power button
4
until the Blue
indicator lights and the beeps sound. If the unit has recently been paired with the
mobile device, the unit will beep and the indicator wil turn orange indicating it is
paired. If you have not paired the mobile device or if the orange indicator does not
light, pair them as described in the
Pairing a Bluetooth Device
section above.
3. Play your music on your mobile device and the sound will be heard through this
unit.
4. The volume is controlled using the volume setting on your phone. You can also
raise or lower the volume using the Volume +
2
or –
1
button on the speaker.
Experiment for the best overall sound.
5. To pause the song playing, press the Power button
4
. To resume playback, press
the Power button
4
again.
6. You can operate the mobile device using its own controls as per its owner’s
manual.
7. To turn off the unit, press and hold the Power button
4
until the indicator turns off
and a series of beeps sound.
LISTENING TO MUSIC
Insert the small end of the AC adapter into the DC In jack
10
(located on the rear of the
unit). Connect the other end to a wall outlet having 120V AC, 60 Hz.
AC CONNECTION
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DANGEROUS VOLTAGE:
The lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ATTENTION:
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
FCC WARNING:
This equipment may generate or use radio frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this equipment if an unauthorized change or modification
is made.
ATTENTION:
POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISES ET POUSSER JUSQU’AU FOND.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The rating information is located at the bottom of the apparatus.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
SURGE PROTECTORS:
It is recommended to use a surge protector for AC connection. Lightning and power surges ARE
NOT covered under warranty for this product.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Only use attachments/accessories specified by the manufacturer.
To be completely disconnected from the power input, the main plug of the AC/DC adapter shall be disconnected from the
electrical outlet. The main plug of the AC/DC adapter should not be obstructed OR should be easily accessed during
intended use.
Do not expose the product to dripping or splashing. Do not place liquid filled objects such as vases on the product.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Imation is under
license. Other trademarks and trade names are those of their respective owners.
IMPORTANT SAFETY INSTRUCTIONS
1.
Read these Instructions.
2.
Keep these Instructions.
3.
Heed all Warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with a dry cloth.
7.
Do not block any of the ventilation openings. Install
in accordance with the manufacturer’s instructions.
8.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding-
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. When the provided plug
does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
15. Do not expose this product to dripping or splashing. Do
not place objects filled with liquids, such as vases, on
this product.
16. Main plug is used as disconnect device and it should
remain readily operable during intended use. In order
to disconnect the apparatus from the mains
completely, the mains plug should be disconnected
from the mains socket outlet completely.
17. CAUTION: To reduce the risk of fire or explosion, do not
expose batteries to excessive heat such as sunshine,
fire or other heat sources.
NOTES:
• Remove both the DC plug and the AC-IN plug to disconnect the AC adapter when
not in use.
• Only use the supplied AC adapter which has the following specs: DC 5V
Z
1. With the mobile device paired and the speaker on, when you receive a phone call,
the music will pause and you will hear your ring tone on this speaker.
2. Press the
button to answer the call and you will utilize the speaker (and built-in
microphone) to take the call.
3. When done, press the
button again to end the call.
HANDLING PHONE CALLS
NOTES:
• If the phone rings and you do not want to answer, press and hold the
button
3
and the caller will go directly to voicemail and the music will continue.
• If the speaker is not paired or there is no input to the auxillary jack, for five minutes,
the unit will automatically power off.
NOTES:
• If the mobile device requires a paring code, use “0000”.
• When using this unit as a phone, the sound will only be heard through the right
speaker to reduce echo.
NOTE:
When the volume is at the maximum or minimum level and the
2
or –
1
button is pressed, the orange indicator will blink.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1.
Warning –
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type.
2. Use only the size and type of batteries specified.
3. Be sure to follow the correct polarity when installing the batteries as indicated in the Battery Compartment.
A reversed battery may cause damage to the device.
4. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries
with fresh ones.
5. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury
from possible battery leakage.
6. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture. (Follow battery
manufacturer’s directions.)
7. Remove batteries promptly if consumed.
8. Clean the battery contacts and also those of the device prior to battery installation.
You can also use batteries to power this unit as
follows:
1. Open the Battery Compartment
11
by sliding
the compartment cover off.
2. Install four (4) AA size batteries, paying attention
to the polarity diagram in the compartment.
3. Replace the Battery Compartment cover
11
.
When the batteries are weak and need replacing,
the indicator will blink slowly.
BATTERY INSTALLATION
