background image

13

TROUBLESHOOTING GUIDE

Symptom

Possible Cause

Solution

Radio

Noise or sound distorted

Station not tuned properly for

Retune the AM or FM broadcast

on radio broadcasts.

AM or FM.

station.

FM: Telescopic antenna is not

Reorient FM telescopic antenna.

properly adjusted.
AM: Unit is not positioned

Rotate unit until best reception is

correctly.

obtained.

AM or FM, no sound.

BAND control not on AM or FM.

Rotate to select AM or FM.

Volume at minimum.

Increase volume.

Cassette Player

No sound.

FUNCTION control not set to TAPE.

Rotate to the TAPE position.

Volume at minimum.

Increase volume.

Sound distorted.

Dirty head.

Clean the head.

Speed varies.

Tape old or worn.

Replace the tape.

Batteries are low.

Replace the batteries.

Cassette Recorder

Will not record.

Erase prevention tab removed.

Cover hole with adhesive tape. 

Distorted sound

Defective tape or dirty tape head.

Replace tape or clean tape head.

on playback.

Compact Disc Player

CD Player will not play.

FUNCTION control not set to CD.

Rotate to the CD position.

CD is not installed or installed

Insert CD with label side up.

upside-down.

CD skips while playing.

Disc is dirty or scratched.

Wipe disc with cloth or use 
another disc.

General

No sound.

Power cord disconnected.

Connect power cord.

No batteries, or batteries not installed

Insert fresh batteries properly.

properly.

Should this unit exhibit a problem, check the following before seeking service:

FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT

WWW.MEMCORPINC.COM 

OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647.

PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED
TO RETURN THIS PRODUCT  TO YOUR PLACE OF PURCHASE OR MEMOREX.

FOR PARTS AND ACCESSORIES, CONTACT FOX INT’L AT 1-800-321-6993.

MP3823 O/M.QXD  4/30/02  10:57 AM  Page 13

Summary of Contents for MP3823

















Reviews: