Memorex MT2252, MT2252 Service Manual Download

Page: 37 / 73

ENGLISH

Direct Channel Selection buttons (0-9)
Press these buttons to select a channel. The channel
number will appear on the upper right corner of the TV
screen. If an invalid channel number is selected, the display
will revert to the original channel.

TV Mode Direct Channel Selection
When the TV/CATV menu option is in the TV setting, all
channels can be instantly selected by using two buttons.
(For example, to select channel 2, press "0", then "2". If you
press only "2", channel selection will be delayed for a few
seconds). For channels 10 and above, press the 2 digits in
order.

- VHF/UHF channels

CATV

- CABLE TV channels

To turn on the TV, press the POWER button.

The VOLUME can be adjusted to a desired level by
pressing the VOL (VOLUME) or

button.

The sound level will be indicated on the TV screen by
green bars and a number. As the sound level in-
creases, so do the number of bars and the number on
the screen. The same is true for decreasing the level.

Set the TV/CATV menu option to the desired position.
When shipped from the factory, this menu setting is in
the CATV setting. See "TO MEMORIZE CHANNELS".

TV OPERATION

CATV Mode Direct Channel Selection
When the TV/CATV menu option is in the CATV setting,
channels can be selected as follows:

NOTE: If the station being viewed stops broadcasting, the

TV will automatically shut off after 15 minutes.

CH. 1-9

CH. 10-12

CH. 13-99

CH. 100-125

Press "0" twice, then 1-9 as needed.
Example, to select channel 2, press
"002".
Press "0", then remaining 2 digits.
Example, to select channel 12, press
"012".
Press the 2 digits in order.
Example, to select channel 36, press
"36".
Press the 3 digits in order.
Example, to select channel 120, press
"120".

CH (CHANNEL) Up and Down buttons
Press and release the CH (CHANNEL) or
button. The channel automatically stops at the next
channel set into memory. Press and hold the button
down to change channels more quickly.

For proper operation, before selecting channels,
they should be set into the TV's memory.
See "TO MEMORIZE CHANNELS".

SETTING LANGUAGE

This TV can display the on-screen language in English, Spanish or French.
On-screen language selection (step 3) will automatically appear on the screen when you press the MENU button initially.
Select the language you prefer first, then proceed with the other menu options.

NOTE:
If Spanish or French is chosen, the Closed Caption indicators will be in the selected language, but the Closed Caption text
will not be affected by the language selection.

Press the SET + or – button to
select the desired language:
English (ENGLISH), Spanish
(ESPAÑOL) or French
(FRANCAIS), then press the
ENTER button.

Press the MENU button.

Press the SET + or – button to
select the LANGUAGE mode,
then press the ENTER button.

Press the MENU button until the
menu screen is cleared.

LANGUAGE

CH SET
PICTURE

V-CHIP SET

AUDIO

〈

+ / – / ENTER / MENU

〉

FRANCAIS

ENGLISH

ESPAÑOL

LANGUAGE / IDIOMA / LANGUE

〈

+ / – / ENTER / MENU

〉

SLEEP

To set the TV to turn off after a preset amount of time, press
the SLEEP button on the remote control. The clock will count
down 10 minutes each time the button is pressed in the order
of 120, 110, 100, ······ 20, 10, 0. After the sleep time is pro-
grammed, the display will disappear then reappear momen-
tarily every ten minutes to remind you the sleep timer function

SLEEP

120

is operating. To confirm the sleep
time setting, press the SLEEP button
once and the remaining time will be
momentarily displayed. To cancel
sleep time, press the SLEEP button
repeatedly until the display turns to 0.

3K00701B-E

18/08/2001, 14:54