11
ENGLISH
TROUBLESHOOTING GUIDE
Before requesting service, please refer to the following chart for the symptom and possible solution.
SYMPTOMS
POSSIBLE SOLUTIONS
• Make sure the power cord is plugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit for an hour, then plug it back in.
• Station or CATV experiencing problems,
tune to another station.
• Check sound adjustments (Volume and
Muting).
• Check for sources of possible interference.
• Station or CATV experiencing problems,
tune to another station.
• Make sure channels are set into memory.
• Check antenna or CATV connections, adjust
antenna.
• Check for sources of possible interference.
• Check picture control adjustments.
• Station or CATV experiencing problems,
tune to another station.
• Make sure channels are set into memory.
• Station is weak, adjust antenna to receive
desired station.
• Check for sources of possible interference.
• Station or CATV experiencing problems,
tune to another station.
• Make sure channels are set into memory.
• Check picture control adjustments.
• Check antenna or CATV connections, adjust
antenna.
• Check for sources of possible interference.
• Station or CATV experiencing problems,
tune to another station.
• Make sure channels are set into memory.
• CATV company is scrambling signal.
• Adjust antenna.
• Check all CATV connections.
• Set TV/CATV menu option to the CATV mode.
• Station or CATV system problems, try
another station.
• Check antenna connections, adjust or
re-direct antenna.
• Check for sources of possible interference.
Poor sound
or No sound
Poor picture
or No picture
Horizontal or
diagonal bars
on screen
No Remote
operation
• Select proper language in the menu options.
Display is not
shown in your
language
No reception
above
channel 13
No CATV
reception
• Batteries are weak, dead or inserted
incorrectly.
• Remote is out of range, move closer to TV
(within 15 feet).
• Make sure Remote is aimed at sensor.
• Confirm there are no obstructions between the
Remote and the TV.
• Make sure the power cord is plugged in.
• Make sure TV/CATV menu option is in the
appropriate mode.
• If using antenna, check UHF antenna
connections.
• No broadcast on station tuned.
• Sleep Timer is set.
• Power interrupted.
TV shuts off
• TV station experiencing problems or program
tuned is not closed captioned. Try another
channel.
• Check CATV connection or VHF/UHF
antenna, reposition or rotate antenna.
• Press TV/CAP/TEXT button to turn on the
closed caption decoder.
Closed -
Caption is
not activated
SYMPTOMS
POSSIBLE SOLUTIONS
SPECIFICATIONS
TV does not
operate
Picture
wobbles or
drifts
Poor color or
no color
Poor recep-
tion on some
channels
AC Power Input:
AC Power Consumption:
Chassis Construction:
Picture Tube:
Horizontal resolution:
Audio Power Output Rating:
Speaker:
Tuner Type:
Remote Control:
120V, 60Hz
110 Watts
IC Solid state
25" (measured diagonally)
260 lines
2.5 + 2.5 Watts
1-1/2" x 2-11/16" Full Range, 8 ohm x 2
181 Channel, Quartz PLL Frequency
Synthesized
Infrared, Direct Access, 2 x AAA batteries
(not supplied)
Remote Control
ACCESSORY
Receiving Channels:
Antenna Input Impedance:
Dimensions:
Weight:
VHF
2-13
UHF
14-69
CATV
01-97 (5A)-(A-3)
98-99 (A-2)-(A-1)
14-22 (A)-(I)
23-36 (J)-(W)
37-65 (AA)-(FFF)
66-125 (GGG)-(125)
75 Ohm (VHF/UHF/CATV)
Coaxial Input
24-5/16" (W) x 19-13/16" (D) x 20-11/16" (H)
59.9 Ibs
11
No reception • Reset your password.
For additional set-up or operating assistance, please visit our WEBSITE at www.memcorpinc.com or
contact CUSTOMER SERVICE at 1-800-919-3647
Please keep all packaging material for at least 90 days in case you need to return this product to
your place of purchase or Memorex.
FOR PARTS AND ACCESSORIES, CONTACT FOX INT'L AT 1-800-321-6993"
3K00701B-E
18/08/2001, 14:54
11
