DISASSEMBLY INSTRUCTIONS
2-19: LOADING GEAR S/T ASS'Y (Refer to Fig. 2-19-A)
1.
2.
3.
4.
5.
6.
7.
8.
9.
1
2
3
Capstan Brake Spring
Capstan Brake Ass'y
Main Rod
Main Loading Gear
Tension Lever
Loading Gear T
Loading Gear
Spring
Loading Arm T Ass'y
Loading Gear S
Loading Gear
Spring
Loading Arm S Ass'y
LED Reflecter
Idler Arm Ass'y
Clutch Actuator
Fig. 2-19-A
NOTES
Loading Arm T Ass'y
Main Loading Gear
Marker
Marker
Loading Arm S Ass'y
1.
Remove the E-Ring
1
and remove the Main Loading
Gear.
Remove the Capstan Brake Spring.
Slide the Main Rod and remove the Capstan Brake
Ass'y.
Remove the Main Rod, Tension Lever, Clutch Actuator,
Idler Arm Ass'y.
Remove the screw
2
and washer
3
.
Remove the LED Reflecter.
Remove the Loading Arm S Ass'y and Loading Arm T
Ass'y.
Remove the Loading Gear S and Loading Gear T.
Remove the Loading Gear Spring.
When you install the Loading Arm S Ass'y, Loading Arm
T Ass'y and Main Loading Gear, align each marker.
(Refer to Fig. 2-19-B)
2.
Fig. 2-19-B
When you install the Clutch Actuator, install as shown in
the circle of Fig. 2-19-C. (Refer to Fig. 2-19-C)
Fig. 2-19-C
Clutch Actuator
2-20: INCLINED S/T ASS'Y (Refer to Fig. 2-20)
Unlock the support
1
and remove the P4 Cover.
Unlock the support
2
and remove the Loading Gear
Holder.
Remove the Inclined S.
Remove the Inclined T.
Remove the 2 screws
3
, then remove the Guide Roller
and O-Ring.
1.
2.
3.
4.
5.
NOTE
Do not touch the roller of Guide Roller.
3
3
1
2
Guide Roller
Loading Gear Holder
O-Ring
Inclined S
O-Ring
Guide Roller
Inclined T
P4 Cover
• Screw Torque: 0.7
±
0.2kgf•cm
Fig. 2-20
B2-5
