9
ENGLISH
Avoid extreme moisture and dust.
The ventilation holes prevent overheating. Do not
block or cover these holes. Especially avoid covering
the holes with soft materials such as cloth or paper.
Avoid places subject to strong vibration. Use in a
horizontal (flat) position only.
Do not insert fingers or any other objects into the
cassette loading slot. Do not spray cleaner or wax
directly on the VCR or use forced air to remove dust.
When you finish operating the VCR, always unload
the cassette and turn off the power.
When you leave your home for a long time, unplug
the AC power cord.
To protect the VCR from a lightning storm, unplug
the AC power cord from the wall outlet and
disconnect the antenna.
Keep the VCR away from flower vases, sinks, etc. If
liquids should be spilled into the VCR, serious
damage will result. If you spill any liquids into the
VCR, unplug the AC power cord immediately and
consult qualified service personnel before attempting
to use the VCR again.
POWER SOURCE
NOTE:
1. Never connect the AC line cord plug to other than the specified voltage
(120V 60Hz). Use the attached power cord only.
2. If the polarized AC cord plug does not fit into a non-polarized AC outlet,
do not attempt to file or cut the blade. It is the user's responsibility to
have an electrician replace the obsolete outlet.
3. If you cause a static discharge when touching the unit, and the unit fails to
function, simply unplug the unit from the AC outlet, wait a few minutes,
and plug it back in. The unit should return to normal operation.
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on AC. Insert the AC
cord plug into a standard 120V 60Hz polarized AC outlet.
Polarized AC Cord Plug
(One blade is wider than
the other.)
Wider Hole
and Blade
4C73201A E (Cover-09)
16/7/99, 11:16 PM
9
