DISASSEMBLY INSTRUCTIONS
1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
1-1: TOP CABINET, FRONT CABINET AND
OPERATION PCB (Refer to Fig. 1-1)
1.
2.
3.
4.
5.
6.
Remove the 4 screws (1).
Remove the Top Cabinet in the direction of arrow (A).
Disconnect the following connector: (CP651).
Unlock the 7 supports (2).
Remove the Front Cabinet in the direction of arrow (B).
Remove the 3 screws (3) and remove the Operation PCB.
1-2: FLAP (Refer to Fig. 1-2)
1.
2.
Open Flap to 90
°
and flex in direction of arrow (A), at
the same time slide in direction of arrow (B).
Then lift in direction of arrow (C).
Fig. 1-2
B1-1
Fig. 1-1
(A)
(C)
(B)
Flap
Upper side
Bottom side
1-4: SYSCON PCB (Refer to Fig. 1-4)
1.
2.
3.
4.
Remove the screw (1).
Remove the screw (2).
Remove the 2 screws (3).
Remove the Syscon PCB in the direction of arrow.
Fig. 1-4
Syscon PCB
Bottom Plate
(3)
(1)
(2)
(3)
1-3: DECK CHASSIS (Refer to Fig. 1-3)
NOTE
Do not remove the cable at the FE Head section. The FE
Head may be damaged if you remove the cable by force.
1.
2.
3.
4.
5.
6.
7.
8.
Remove the screw (1).
Remove the FE Head.
Remove the screw (2).
Remove the 2 screws (3).
Unlock the 2 supports (4).
Remove the BOT PCB in the direction of arrow (A).
Disconnect the following connectors:
(CP1001, CP4001, CP4002 and CP4003).
Remove the Deck Chassis in the direction of arrow (B).
Deck Chassis
Fig. 1-3
Bottom Plate
(2)
(1)
(3)
(3)
FE Head
BOT PCB
(B)
(A)
(4)
(4)
(B)
(A)
Top Cabinet
Operation PCB
Front Cabinet
(1)
(1)
(1)
(1)
(3)
(3)
(3)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
