14
Press the CALL button. The clock, date, channel number,
real time tape counter, tape speed and VCR operation will
be indicated.
Press CALL button again to remove the call display.
Press MUTING button to switch off
the sound. The TV/VCR’s sound will
be silenced and “MUTING” will
briefly appear on the screen. The
sound can be switched back on by
pressing this button again or one of
the VOLUME Up or Down buttons.
MUTING
Press and release the CHANNEL
Up or Down button. The channel
automatically stops at the next
channel set into memory. For proper
operation, before selecting chan-
nels, they should be set into the
memory.
CH 012
NOTE:
To listen through the headphone, insert a
headphone (not supplied) with a 1/8" mini plug
into the PHONES jack on the front. The sound
from the TV speaker is muted.
Press TV/CAP/TEXT button to
switch between normal TV and the
two closed caption modes (captions
and full screen text). Closed
captioning will display text on the
screen for hearing impaired viewers.
NOTES:
•
If using an indoor antenna or if TV reception
is very poor, the Closed Caption Decoder text
may not appear. In this case, adjust the
antenna for better reception or use an outdoor
antenna.
•
When activating the Closed Captioned
Decoder, there will be a short delay before
the Closed Captioned text appears on the
screen.
•
Closed Captioned TV programs can be
recorded and played back on a VCR with the
Closed Captioned text intact. The Closed
Captioning text will disappear during Cue,
Rewind and Pause modes or if the VCR
tracking is not adjusted properly.
•
Closed Captioned text is only displayed in
locations where it is available.
•
If the Call display is on, the Closed Captioning
text will not appear.
CAPTION CH 1
CH 012
This button allows you to go back
to the last channel selected by
pressing the QUICK VIEW button.
Press this button again to return to
the last channel you were watch-
ing.
SLEEP
120
To set the TV/VCR to turn off after a preset amount of
time, press the SLEEP button on the remote control.
The clock will count down 10 minutes for each press of
the SLEEP button (120, 110, ...10, 0). After the sleep time
is programmed, the display will appear briefly every ten
minutes to remind you that the sleep timer is operating.
To confirm the sleep timer setting,
press the SLEEP button and the
remaining time will be momentarily
displayed. To cancel the sleep timer,
press the SLEEP button repeatedly
until the display turns to 0.
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display
Closed Captioned television programs. Closed Captioning
will display text on the screen for hearing impaired
viewers or it will translate and display text in another
language.
CLOSED CAPTIONING WITH A VCR
Closed Captioned programs can be recorded and played
back on a VCR with the Closed Captioned text intact.
The Closed Captioned text will disappear during Cue
(Fast Forward Search), Review (Rewind Search) and
Pause Modes or if the VCR tracking is not adjusted
properly.
TO VIEW CLOSED CAPTIONS
Press the TV/CAP/TEXT button on the remote control to
switch between normal TV and the two Closed Caption
Modes (Captions and Full Screen Text).
MUTING
CALL
8:47AM THU
CH 012
00:04:38 SP
Current time
Channel No.
VCR operation
: Play
: Rewind
: Fast-forward
: Eject
: Recording
: Pause
: Stop
Tape In
Auto Repeat
Tape Speed
Real Time Counter
SLEEP
QUICK VIEW
TV/CAPTION/TEXT
CHANNEL UP / DOWN
TV OPERATION
See pages 15 and 16 “To memorize channels”.
5A30401A E P12-19
8/20/01, 12:53 PM
14
