DISASSEMBLY INSTRUCTIONS
1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
B1-1
1-1: BACK CABINET (Refer to Fig. 1-1)
1.
2.
3.
4.
Remove the 4 screws
1
.
Remove the 2 screws
2
.
Remove the screw
3
.
Remove the Back Cabinet in the direction of arrow.
1
1
1
1
2
2
Front Cabinet
Back Cabinet
3
Fig. 1-1
CAUTION: BEFORE REMOVING THE ANODE CAP,
DISCHARGE ELECTRICITY BECAUSE IT
CONTAINS HIGH VOLTAGE.
BEFORE ATTEMPTING TO REMOVE OR
REPAIR ANY PCB, UNPLUG THE POWER
CORD FROM THE AC SOURCE.
1-2: TV BLOCK (Refer to Fig. 1-2)
1.
2.
3.
4
Remove the CRT PCB in the direction of arrow (A), then
unplug the following connector: (CP801).
Remove the Anode Cap.
(Refer to REMOVAL OF ANODE CAP)
Disconnect the following connectors:
(CP820, CP810, CD850, CP401, CD840 and CP502 ).
Slide out the TV Block in the direction of arrow (B).
Front Cabinet
TV Block
(B)
CRT PCB
(A)
Fig. 1-2
1-3: VCR BLOCK (Refer to Fig. 1-3)
1.
2.
3.
4.
Remove the 2 screws
1
.
Disconnect the following connector: (CP351).
Unlock the support
2
.
Remove the VCR Block in the direction of arrow.
Front Cabinet
VCR Block
1
1
2
Fig. 1-3
1-4: MAIN PCB (Refer to Fig. 1-4)
1.
2.
3.
Remove the 5 screws
1
.
Remove the screw
2
.
Unlock the 2 supports
3
and remove the Main PCB in
the direction of the arrow.
2
3
3
1
1
1
1
1
TV PCB Holder
Main PCB
Fig. 1-4
1-5: DECK SHIELD PLATE (Refer to Fig. 1-5)
1.
2.
Remove the 4 screws
1
.
Remove the Deck Shield Plate in the direction of arrow.
Fig. 1-5
Deck Shield
Plate
1
1
1
1
Syscon PCB
