16
With the power off, press the
TIMER button
❶
; “TIMER” will
blink in the display. Press and
hold the MEM/ CLOCK button
❷
until the Timer Hour blinks in the
display.
2
1
1
Within a few seconds, “TIMER” will
light in the display to indicate that
the timer is set. When the actual
time matches the time set for the
Timer, the unit will turn on to the
last function (CD or tuner) used. It
will play for one hour (in the Tuner
mode) or to the end of the disc (in
the CD mode) and then shut off
and reset itself for the following day.
TO TURN THE TIMER OFF SO IT
IS NOT SET FOR THE NEXT
DAY,
press and hold the TIMER
button again until “TIMER”
disappears from the display.
3
Press the
CD
Skip/Search
❶
or
❷
button to set the hour,
then press the MEMORY/ CLOCK
SET button
❸
again; the minute
digits will blink. Press the
CD
Skip/Search
❶
or
❷
button to set the minutes, then
press the MEM/CLOCK button
❸
again.
1
3
2
2
SETTING THE TIMER
Set the timer to turn the unit on to the Tuner or CD mode at a preset time as follows :
NOTE:
Please make sure the volume is set to the desired level to wake you up.
OPERATING INSTRUCTIONS (CONTINUED)
Press the POWER button to turn
the unit on and tune the desired
radio station or insert a CD as
previously instructed.
1
Press the SLEEP button a second
time to set the unit to turn off after
80 minutes. Each additional press
with decrease the sleep time by 10
minutes. After the sleep time is set,
the SLEEP Indicator will light in the
display after five seconds, then you
can press the SLEEP button at any
time to stop the Sleep function;
“SLEEP” will disappear from the
display.
3
Press the SLEEP button and “90”
will appear and “SLEEP” will blink
in the display.
2
ACTIVATING THE SLEEP FUNCTION
Set the sleep timer as follows:
SNOOZE
The timer can be temporarily turned off manually by pressing the SNOOZE button; the timer will turn back
on automatically nine minutes later.
MX3905.O/M.QXD 2/20/03 7:06 AM Page 16
