8
OPERATING INSTRUCTIONS (CONTINUED)
Standby (Power Off) Mode
In Standby (Power Off) mode the display shows the correct time. Press
the DISPLAY button once to show the TIMER ON time. After five
seconds the display returns to the correct time.
Tuner Mode
In Tuner mode the display shows a radio frequency. Press the DISPLAY
button once to show the correct time, or twice to show the TIMER ON
time. After five seconds the display returns to the correct time.
CD Mode
In CD mode the display shows the CD track number and elapsed time.
Press the DISPLAY button once to see the Remaining Time on the
disc, twice to see the correct time, and a third time to see the TIMER
ON time. After five seconds the display returns to the correct time.
1
DISPLAY BUTTON (REMOTE CONTROL ONLY)
When the unit is first turned on, the display will slowly cycle through all
the colors. Press the COLOR MODE button when the desired color
appears and that color will remain. To begin the cycling of the colors,
press the COLOR MODE button again.
Press and hold the COLOR MODE button, then release and the color will
change one by one. Press the COLOR MODE button again when the
desired color appears and the color will remain. Press the COLOR
MODE button repeatedly, the color will change by each press.Press and
hold the COLOR MODE button then release, the display will slowly cycle
through all colors again."
1
CHANGING THE LIGHTING IN THE DISPLAY
Press the PRESET EQ button to
cycle through the preset EQ
settings, or to turn the EQ off.
Each press of the PRESET EQ
button will cycle as follows:
CLASSIC (harp), ROCK (guitar)
POP (dancing), Off.
1
PRESET EQ
To listen to the unit through
headphones, simply insert the
headphones (not included) into
the Headphones jack. The
speakers will be disconnected
when the headphones are
plugged in.
1
HEADPHONE JACK
MX3905.O/M.QXD 2/20/03 7:06 AM Page 8
