MOUNTING
FEET INSTALLATION
Your Memphis Marine Enclosure includes (4) rugged feet. Align the feet with the pre-drilled threaded holes on the
unit. Each foot will use 2 Allen head bolts and 2 washers. Align the first washer with the first hole in the foot and
insert the screw and hand tighten. Repeat this process for each hole in the 4 feet. Once complete, tighten the
screws down until secure (Do NOT over-tighten).
SECURING TO YOUR VEHICLE
Once you’ve determined your mounting location, double check that your units feet will mount to the vehicle
securely on a flat even surface free from any hazards. Using the provided (8) screws, drill a pilot hole with a smaller
bit in the mounting holes of the feet. Using the included screws, screw the unit down to the surface of your vehicle.
Repeat this process for all the mounting holes on your unit.
End Panel Connections