3
Built-In Grill Island Dimensions
VGB0002 ELITE BUILT-IN
DIMENSION
TOLERANCE
A
42
5/8
”
± 1/8”
B
16 ¾”
± 1/8”
C
24 ½”
± 1/8”
D
8 ½”
+ 1/8” -0”
E
6 ½”
+ 1/8” -0”
F
3” to 9’
G
3 ½” MIN
H
12” MIN
J
22”
±1”
K
Standard
Cabinet
Height
VGB0002 ELITE BUILT-IN
DIMENSION
TOLERANCE
A 108.3 cm
± .30cm
B 42.6 cm
± .30cm
C 62.9 cm
± .30cm
D
21.6 cm
+.30cm -0cm
E
16.5 cm
+.30 cm -0cm
F 7.7 cm to
2.74 m
G
8.9 cm
H
30.5 cm
J
55.9 cm
±2.54cm
K Standard
Cabinet
Height
WARNING: See clearance to combustible materials, when designing and constructing a built-in island. Built-In islands must
be built to the specifications listed below.
The owner and/or builder are responsible for consulting local, county and state building codes for securing any necessary
building permits before construction. NOTE: Construction codes vary from locality to locality.
NOTE: Dimensions are to the finished surfaces. Grill cavity
surfaces are to be plumb and level to ensure a proper fit.
ITC Control Location
110/120v* AC supply required
within 10 ft. of the ITC.
NOTE: The location of the ITC is for
illustration purposes only. The grill
is equipped with 10 feet of cable,
allowing it to be mounted in a
variety of locations.
*European 230V
Controller cable way is to
maintain dimensions D and E
throughout its entire path.
The controller cable way may be
located either through the back
of the island’s cavity, or in
either side of the cavity as
depicted below.
