20 of 28
HOW TO REMOVE THE WOODBURNERS INTERNAL PARTS
It is now possible to
remove the top baffle brick
by Li�ing up the Le� side
and sliding it to the Le�
then dropping it down.
The right hand side brick
can be removed by gently
pulling it down from the
top.
You may find it easier to
remove the cast iron grate
before finally removing
the rear brick.
To remove the vermiculite
brick set take the following
steps:
Li� out the 2 base bricks
next to the grate. Li� out
log retainer
Remove the Le� hand
vermiculite side brick by
Li�ing the top baffle brick
and pulling the side brick
down from the top.
To remove the upper steel
baffles/ turbulence plates
Firstly Li� the upper,
ribbed, turbulence plate ,
slide forwards towards the
front
of the stove.
This will create enough
space to allow the plate to
drop down so that the
baffle can be removed.
To remove rear steel baffle
simply push this away from
the holding frame, which it
rests on, and twist it to fit
through the opening.
You now have access to the
flue system, whether the
collar is situated on the top
or to the rear of your
stove.