1. Charge the battery before completely discharged. Always stop tool operation and charge the battery when you
notice less tool power.
2. Never recharge a fully charged battery cartridge. Overcharging shorten the battery service life.
3. Charge the battery with room temperature 10℃-40℃ (50 oF ‒ 104 oF). Let a hot battery cool down before charging it.
4. Charge the Lithium-ion battery when you do not use it for more than six months.
1.Button
2.Battery cartridge
.Always be sure that the tool switched off and the battery cartridge is removed before adjusting or checking
function on the tool.
.Always switch off the tool before insertion or removal of the battery cartridge.
.To remove the battery cartridge, withdraw it from the tool while pressing the buttons on both sides of the cartridge.
.To insert the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip
it into place. Always insert it all the way until it locks in place with a little click. If not, it may accidentally fall out of
the tool, causing injury to you or someone around you.
.Do not use force when inserting the battery cartridge. If the cartridge does not slide in easily, it is being inserted
correctly.
1.Switch trigger
Summary of Contents for ED-LS1
Page 1: ......