a. Feed the smaller end of the Lower Cable (
50
) through the slot in the Leg Developer (
7
). Insert 2 x
22mm Pulley Bushes (
43
) into the holes and attach the 1
st
pulley (
42
) using 1 x M10 x 65mm Allen
Bolt (
64
), 1 x M10 Aircraft Nut (
77
).
b. Repeat for the 2
nd
and 3
rd
pulleys, feeding cable through opening in the Leg Support Tube (
5
) and
Vertical frame (
2
).
c. Place the 4
th
pulley (
42
) onto the cable and fit Pulley covers (
61
) over the Pulley and cable. Attach the
pulley assembly to the other end of the Double Pulley Bracket (
15
) using 1 x M10 x 45mm Allen Bolt
(
67
), 2 x Ø10mm Washers (
73
) and 1 x M10 Aircraft Nut (
77
).
h. Attach the 5
th
pulley to the Base Frame (
3
) using 1 x 1 x M10 x 45mm Allen Bolt (
67
), 2 x Ø10mm
Washers (
73
) and 1 x M10 Aircraft Nut (
77
).
d. Place the 6
th
pulley (
42
) onto the cable and fit pulley covers (
61
) over the Pulley and Cable. Attach the
pulley assembly to the Floating Double Pulley Bracket (
30
) using 1 x 1 x M10 x 45mm Allen Bolt (
67
),
2 x Ø10mm Washers (
73
) and 1 x M10 Aircraft Nut (
77
).
e. Attach the end of the Lower Cable (
50
) to the bracket on the Vertical Frame (
2
) using 1 x M10 x
25mm Allen Bolt (
66
), 2 x Ø10mm Washers (
73
) and 1 x M10 Aircraft Nut (
77
).
Step 15
Assembly instructions
21
