138
Operating Instructions - CPC6050
Modular Pressure Controller
CPC6050
11.3 Touchscreen Calibration
The Touchscreen Calibration App is used to perform re-calibration and adjustment of the touch-
screen by aligning it with the display behind the screen. This is done by guiding the user to up to
three points on the screen. The touchscreen calibration can be started by pressing [
] on
the right side of the screen (Figure 11.3-A). During the calibration, the CPC6050 would prompt
and guide the user to press different target points on the screen (Figure 11.3-B). After success-
fully completing the calibration, the user is directed back to the Technical Assistance menu.
Figure 11.3-A - Touchscreen Prompt
Figure 11.3-B Touchscreen calibration in progress
