Operating Instructions - CPC6050
33
Modular Pressure Controller
CPC6050
6.4.1.2.5 Program Data Entry
The fifth entry method is through the automated Programs stored in the CPC6050 memory. The Program
Player allows the user to select one of the stored Programs and use it for setpoint entry. A Program can
be chosen by using the Up [
] or Down [
] buttons. After selecting the desired program, press the
Play [ ] button to start the program. More information on the Program Player and how to create/ edit
programs is available in section 6.4.7, Programs Application.
Figure 6.4.1.2.5 - Program Data Entry
6.4.1.3 Units and Pressure Type
The Units button is always displayed. When the units button is pressed a selection of imperial and metric
units will be displayed on the right (figure 6.4.1.3 - A).The Pressure Type button is only active if there is an
optional Barometer installed. Otherwise, the Pressure Type button becomes a label (figure 6.4.1.3 – B)
indicating the native mode of the channel (absolute or gauge). When an optional barometer is installed,
a native gauge transducer can emulate absolute pressure using the barometric reference. Alternatively, a
native absolute transducer can emulate gauge pressure. Emulation can be activated simply by pressing
the Pressure Type button. The Pressure Type button becomes a label when the selected pressure unit is
"% of F.S. value".
Figure 6.4.1.3-A Figure 6.4.1.3-B
Pressure Units button
Pressure Type button
