10
Verify connection
IMPORTANT
! After calibration, verify the connection by pressing the buttons one by one and observing
the trim tabs. Check the actual movement of the tabs at the transom. For the automatics to work
properly, the trim tabs have to move in the correct direction when controlling them manually.
The uppermost button
controls both tabs down-
wards.
The lowermost button
controls both tabs up-
wards.
Should the trim tabs move in the wrong direction: For hydraulic trim tabs, exchange the 5 and 6 wires,
for electromechanical trim tabs, reverse the wires of the actuator(s) that move in the wrong direction.
The port button controls
the port tab upwards first
and then the starboard tab
downwards.
The starboard button
controls the starboard tab
upwards first and then the
port tab downwards.
Should the trim tabs move in the wrong direction: For hydraulic trim tabs, exchange the 3 and 4 wires,
for electromechanical trim tabs, exchange the 3 and 4 wires with the 5 and 6 wires.
