6
Installation
ACS R and ACS RP have built-in sensors that measure the boat’s movements and should therefore be
mounted upright or laying down. All angles between upright and laying down are allowed.
1) Upright 2) 3) Between upright and laying down 4) Laying down
Regardless of the mounting angle, the starboard button should face the starboard side of the boat and
the port button the port side.
5) Starboard button facing the starboard side 6) Port button facing the port side
Drill the holes
50 mm (2")
66.5 mm (2.62")
80.0 mm (3.15")
Choose a location close to the helm where the
control panel is easy to access and drill holes for
the screws and connectors using the enclosed
drill pattern. In retrofit installations, remove the
old panel and use the new panel to cover the
hole.
