Phone
: (216) 265-2315
Fax
: (216) 267-2915
www.mentorradio.com
6
Wireless Solutions for Advancing Communications
Basic Features
Channel Spacing:
25kHz or 8.333 kHz
Synthesized Tuning -
Customer programmable. Utilizing a standard DB-9 serial cable
(included) use your PC to program the operating frequency using custom PC software.
Password authentication required to change operating frequency for increased security and to
prevent inadvertent changes.
Indicator lights
-
Colored LED’s light up to display relay activation. A STATUS LED flashes
once per second to indicate normal operation. A WINDOW LED turns on to indicates a mic
click has been detected and the unit is waiting for more clicks. Relays can only be energized
with the WINDOW LED is on.
Relays reactivate after power restoration
–
Automatically energizes those relays that were
energized prior to the moment power was lost. If the power is restored the timeout period is
reset to a full timeout period.
Operates from wide range of power sources
–
The controller can operate with any power
from 10VDC, 12VDC, 24VDC, 30VDC, 115VAC, or 230VAC. Conversion from DC to AC
power sources requires sending the unit back to the factory for re-configuration. Remote
locations may find it convenient to power the unit from a solar panel with a battery back-up to
simplify remote installations.
Test Button
-
Test relays and controller circuits without radio inputs.
Reset Button -
De-energize relays before timeout expiration.
8 Different Time Out Values
-
No timeouts, 10 seconds, 5, 10, 15, 30, 45 & 60 minutes.
Available in 8 and 12 hour timeouts intervals upon special request.
Optional Weatherproof Enclosure
-
Unit fits into a 12”x6” fiberglass enclosure with built-in
mounting capability.
Optional Lightning Protection
- Available for both AC line input and antenna input.
Power Status
- Indication built into the STATUS LED.
Receiver Sensitivity Adjustment
- Potentiometer adjustment allows setting receiver
sensitivity within the range of about 1 uV to more than 10,000 uV.
