Menuett 001451, Operating Instructions Manual

EN

19

FROTHING ONLY

     NOTE:   
Add no more than 100 ml of milk, otherwise 
it can run over after frothing.

1.  Carry out steps 1–4 in the instructions for 

frothing and warming.

2.  Press and hold the switch button for two 

seconds. The power switch flashes blue.

3.  When the power switch goes red the 

frothing is ready and the lid can be  
taken off.

4.  Unplug the plug from the power point 

after use.

MAINTENANCE

•  Wash the lid with water and a mild 

detergent, rinse well and wipe dry.  
Do not wash in a dishwasher.

•  Take out the mixer/frother and wash in 

hot water.

•  Wash the inside of the jug with water and 

a mild detergent, and then wipe dry with 
a soft cloth.

•  Wipe the outside of the jug with a soft, 

slightly damp cloth. 

•  The power cord can be wound up 

underneath the base plate to put it out of 
the way. 

     NOTE:   

•  Switch off the milk frother, unplug the 

plug from the power point, and allow it 
to cool completely before cleaning.

•  Do not immerse the jug or the base in 

water or any other liquid.

•  Do not use abrasive detergents or 

implements on the milk frother, this can 
scratch the surface. Never use toxic 
detergent.