37
2022_001
●
Only connect the product to a power outlet
that is correctly earthed. Speak to an
authorized electrician if you are not sure.
●
Make sure that the mains voltage corresponds
to the rated voltage on the type plate of the
product. Speak to an authorized electrician if
you are not sure.
●
Speak to an authorized electrician it the power
plug does not fit in the power outlet.
●
Make sure that no other products are
connected to the same electrical circuit.
●
Do not put the power cord over a table or
worktop edge.
●
Do not use the power cord to carry the
product.
●
Do not use the power cord to pull the power
plug from the power outlet.
●
Do not put the product on a hot surface, for
example a stove.
●
Do not put the power cord on or near hot
surfaces.
●
Make sure that there is at least 5 cm of free
space on all sides of the product so that air can
circulate around all sides of the product.
●
Do not put objects on the product.
●
Make sure that the air intakes and air outlets
are not blocked.
●
Make sure that flammable materials does not
touch the product.
●
Do not use a power strip or an extension cord.
●
Do not use an external timer or separate
remote control with the product.
●
Do not go away from the product when it is in
operation.
●
Disconnect the product from the power outlet
and make sure that all moving parts have
stopped before you go away from the product.
●
Disconnect the product immediately if the
product emits black smoke.
●
Disconnect the product from the power outlet
when it is not in operation.
●
Disconnect the product from the power outlet
before you clean or do maintenance on the
product.
●
Make sure that all moving parts have stopped
before you remove or disassemble accessories.
●
Make sure that all moving parts have stopped
before you clean or do maintenance on the
product.
●
Keep the product in a dry and closed storage,
away from children, when the product is not in
operation.
●
Clean the product regularly.
3
Operation
3.1 To do before you operate the
product for the first time
1
Remove all packaging and stickers.
Warning!
Risk of electrical shock. Do not use a
dishwasher to clean the product. Only the accessories can
be cleaned in a dishwasher.
2
Clean the accessories in hot water and washing-up
liquid.
Warning!
The cutting equipment is sharp. Be careful
when you clean the cutting equipment.
3
Clean the surfaces of the product with a damp cloth
and a mild detergent.
4
Let all parts become dry before you operate the
product.
3.2 To use the control knob
The product has a control knob that controls the speed of
the product. The control knob has 4 different positions.
●
“0” = Off position. Turn the control knob to the “0” position
to stop the product.
●
“P” = Pulse function. Turn the control knob to the “P”
position and hold it to use the pulse function. The control
knob automatically returns to the off position “0” when
you release it. You can use the pulse function to operate
the product with short pulses or quick and fast mixing.
●
“1” = Low speed. Turn the control knob to the “1” position
to use low speed.
●
“2” = High speed. Turn the control knob to the “2” position
to use high speed.
