Menuett 008378, Operating Instructions Manual

EN

18

USE

BEFORE USING FOR THE FIRST TIME

1.  Remove all packaging material. Check 

that no parts are missing or damaged.

2.  Wash all accessories in a warm soapy 

water and rinse well.

3.  Wipe the product casing with a damp cloth.
4.  Do not use abrasive or strong detergents. 

     WARNING!   
Never immerse the percolator in water or any 
other liquid.

HOW TO USE

1.  Place the percolator on a dry, stable and 

level surface.

2.  Fill the pot with cold water to the max-min 

marking.

3.  Twist the lid in place on the pot and plug 

the plug into a power point.

4.  Switch on the power switch and turn 

the temperature dial to the required 
temperature.

5.  The RED status light goes on while the 

water heats up. It goes off when the water 
has reached the set serving temperature, 
and the GREEN keep-warm status light 
goes on.

6.  Press the lever horizontal to tap out the 

water. Return the lever to an upright 
position to close the tap.

7.  When there are less than 3 cups of water 

in the pot, switch off the percolator and 
pull out the plug.

     NOTE:   
Make sure that the water level in the pot is at 
least over the min mark (see level indicator) to 
avoid boiling dry and automatic switching off.

SYMBOLS

Read the instructions.

Recycle discarded product 
in accordance with local 
regulations.

Approved in accordance with 
the relevant directives.

TECHNICAL DATA

Rated voltage 

 230 V, 50~60 Hz

Output 1500 W
Volume 

6 L

Cord length 

1.5 m

Size 

380 x 250 x 280 mm

Weight 

2.2 kg

Temperature range 

30 - 100°C 

DESCRIPTION

1.  Lid
2.  Handle (on both sides)
3.  RED status light for heating
4.  GREEN status light for keeping warm
5.  Level indicator
6.  Tap
7.  Power switch
8.  Temperature setting
9.  Strainer
10.  Riser
11.  Stabilising spring with silicone rubber foot

     FIG.   1