EN
15
• The mat can be removed from the product
and washed or vacuum cleaned to
remove dust and mud. Allow the mat to
dry in a cool place before putting it back.
Do not expose the mat to heat or direct
sunlight when drying it.
• If a brush needs to be replaced, undo the
screw holding the brush and pull the
brush to the side to remove it from the
axle. Fit a new brush by following the
instructions in the reverse order.
Make sure that the screw rests on
the flat side of the motor axle.
NOTE:
Do not rinse the product with water.
Summary of Contents for 012267
Page 3: ...1 1 2 3 4 5 6 7 8 2 1 2 4 5 3 ...
Page 28: ......
