Merak MMk-736 Installation Manual Download

Page: 5 / 16

MERak

MMk-736

GSM/M2M Gateway for Lifts

Rev. M1.0.3 - F1.0.3

Installation Manual

5 of 16

1.3.

Characteristics

The main features of the MMk-736 are listed below:



It transmits data for remote monitoring and home automation applications (M2M)



Internal security battery which works in the event of power failure



Ready to be fitted onto the wall via external screws or DIN rails



It connects up to four emergency phones



Compatible with any analogue emergency phone



It works with all mobile service providers



Power supply: 12V / 2A



Consumption: 65mA minimum; 270 mA maximum



Quad-band (GSM 850/900/1800/1900 MHz) and GPRS



Connection ports for manoeuvres

: RS232, CAN BUS, RS485 and two general purpose

pins



FXS telephone port with detachable connector



External GSM 900/1800 antenna



Standard model SIM card

Available according to model

Summary of Contents for MMk-736

















Search results

Summary of Contents for MMk-736

Reviews:

Related manuals for MMk-736

Brands by name

Popular brands

Merak MMk-736, Installation Manual

Search results

Summary of Contents for MMk-736

Reviews:

Related manuals for MMk-736

Brands by name

Popular brands