12
3.6 Collect Additional Hardware for Installation
3.5 Collect Tools
You will need the following tools to perform an installation:
Recommended
Required
Flat-head
screwdriver
Tin snips
(if mounting with hose clamps)
Phillips
screwdriver
Power screwdriver with 5/16”
(8 mm) nut driver, Phillips & flat heads
Drill with appropriate bits
for mounting wall anchors
(if mounting to a wall)
Required
Network cables with RJ45 connectors long enough for your particular mounting location
802.3af PoE power source (either PoE switch or Meraki 802.3af PoE Injector)
Connection to the internet (if you are setting up your MR66 as a gateway to the internet)
Appropriately sized metal straps (if mounting to a pole larger than 3.9” in diameter)
Specialized mounting hardware if mounting to surface other than wood, stucco or stone
Recommended
Laptop with wireless to verify setup
