5
5. Assemble Instruction
1
2
3
4
1. Place the treadmill on the ground, unfold the treadmill by hand carefully.Tighten the
frame to the base with 4 socket head screws in the tool bag (2 screws on each side).
2. Unfold the panel and fix the panel to the supporting frame with the pre-installed screws
(See Fig 2)
3.
The knob at the bottom of the frame can turn around based on the the position of
the adjuster,and make sure the knob withstand the base and steady enough.
(See Fig 3)
4.
[ Important ]
Put safety key on the computer
and finish the assembly
(See Fig 4)
