20-08324-UK
-02
4
RECONDITIONING AND SERVICE
1. Fix lifting mechanism
1. function/cleaning
2. lubrication
3. attachment/tightening
2. Fixation
1. function / attachment
2. plastic bushing / lubrication
3. bottom plug supplement
4. rot. disk/ attachment / function
3. Chassis
1. welds
4. Seat frame
1. mechanical/welds
2. bolted joints/tightening
3. plastic plugs/bushings
4. seat/cleaning/change
5. Seat tilt
1. wear on moving parts
2. manual angling/locking
3. control / lubrication
6. Back mechanism
1. function/wear
2. attachment/tightening
3. plastic plugs/bushings
4. backrest/cleaning/change
7. Armrests (option)
1. function/wear
2. plastic plugs/bushings
3. armrests/cleaning/change
4. controls under armrest/function
5. control box/joystick/charger
connector
8. Castors (option)
1. castor / wheeled foot option
9. Upholstery accessories
1. cover upholstery
10. Cleaning
1. base
2. padded parts
3. other mechanisms
11. Brake
1. function/lift height
2. function/bearings
3. wear brake rubber
4. brake lever
Do not use high pressure when
cleaning because it penetrates into
bearings,
etc., resulting in excessive wear.
! Important information when reconditioning and servicing REAL 2000 (called the Product below):
- The Product does not require periodic maintenance in cases where it has a responsible prescriber in the
healthcare sector. In markets outside of Sweden and Norway where a distributor has sold the Product directly
to the user (where applicable), and therefore there is no responsible prescriber, periodic maintenance must
be performed every other year during the Product’s entire life cycle in accordance with sections 1-11 in this
section.
- A thorough visual inspection must be performed of the Product’s main components in connection with service
and reconditioning in order to ensure the user’s safety. These include the base, lifting mechanism, seat frame,
back recliner and U-bars for armrests. The inspection must include welds, lockable functions and settings.
- The user must not sit in the Product while it is being reconditioned or serviced or during maintenance.
- Do not use high pressure washers when cleaning the Product.
- In case of reduced braking action, check both the stability of the base and the condition of the brake rubber.
If the Product is not resting on all four wheels in the unbraked position, the Product must be withdrawn from
service immediately. Check for instability in different locations and directions to rule out the floor as the cause
of any instability.
Summary of Contents for REAL 2000 Series
Page 7: ...20 08324 UK 02 7...
