Mercado Medic REAL 2000 Series, Instructions For Use And Maintenance Manual

20-08324-UK

-02

6

SEAT HEIGHT AND ROTATION RELEASE

BRAKE

NOTE! 

Check to see if the rotation lock is locked.

If the chair is not rotationally locked, be careful when

getting off/on the chair.

CONTROLS

1.  Seat height. Gas spring – move lever up. The seat 

cannot be loaded when it has to be raised.

2.  Turn clockwise to disengage, and counterclockwise to 

lock. 

NOTE! 

The brake on the chair must always be 

applied when getting in and out of the chair. The 

brake must be checked on a regular basis. In case of 

wear, change the brake rubber. The braking function 

may be reduced on uneven surfaces. 

THERE ARE THREE TYPES OF BRAKE:

brake lever and foot brake.

CONTROLS

1. Handbrake – move lever forwards.
2. Foot brake – press the pedal down.

BACK/ABDOMINAL MECHANISM 

CONTROLS

1. Height.
2. Angle of mechanism.
3. Backrest/abdominal rest angle.

1

1

1

1

1

1

3

2

2

SEAT TILT

NOTE! 

Before using the chair, lock the seat tilt 

properly. Tighten the seat angle regularly.

CONTROLS

1. Seat angle. Loosen the knob, set the desired seat tilt. 
  Lock the knob.

2

2

1

3

2